Konfigurasi pada R1 :
# system identity set name=R1
# interface bridge add name=loopback1
# interface bridge add name=loopback2
# routing bgp instance set default as=100 router-id=1.1.1.1
# ip address add address=1.1.1.1 interface=loopback1
# ip address add address=10.10.12.1/30 interface=ether2
# ip address add address=11.11.11.11 interface=loopback2
# ip route add distance=1 dst-address=22.22.22.22/32 gateway=10.10.12.2
# routing bgp network add network=1.1.1.1/32
# routing bgp peer add multihop=yes name=peer1 remote-address=22.22.22.22 remote-as=200 update-source=loopback2
Verifikasi :
> routing bgp peer print detail
- BGP Peer Advertisements
> routing bgp advertisements print
- BGP Routing Table
> ip route pr
- BGP Connectivity
> ping 2.2.2.2 src-address=1.1.1.1
Konfigurasi pada R2 :
#system identity set name=R2
#interface bridge add name=loopback1 dan add name=loopback2
#routing bgp instance set default as=200 router-id=2.2.2.2
#ip address add address=2.2.2.2 interface=loopback1
#ip address add address=10.10.12.1 interface=ether1
#ip address add address=22.22.22.22 interface=loopback2
Verifikasi
> routing bgp peer print detail
BGP advertisement
> routing bgp advertisements print
Tabel routing
> ip route print
Konekfikasi antar BGP
> ping 1.1.1.1 src-address=2.2.2.2
Sekian tutorial dari saya, semoga bermanfaat.
0 Response to "Mengkonfigurasi BGP Lab 4 eBGP Peering(Loopback-Multihop) "
Posting Komentar